BORDEN CHEMICAL CONSUMER PRODUCTS
DEPT -- ELMER'S EPOXY,PART 2
MATERIAL SAFETY DATA SHEET
FSC: 8040
NIIN: 00N006187
Manufacturer's CAGE: 86142
Part No. Indicator: B
Part Number/Trade Name: ELMER'S
EPOXY,PART 2
===========================================================================
General Information
===========================================================================
Company's Name: BORDEN CHEMICAL,CONSUMER
PRODUCTS DEPT
Company's Emerg Ph #: 614-457-5200
Record No. For Safety Entry: 002
Tot Safety Entries This Stk#: 002
Date MSDS Prepared: 01JAN85
Safety Data Review Date: 22APR85
MSDS Serial Number: BCMDT
NRC/State License Number: N/A
Net Propellant Weight-Ammo: N/A
===========================================================================
Ingredients/Identity Information
===========================================================================
Proprietary: NO
Ingredient: POLYAMIDE RESIN COMPOUND
Ingredient Sequence Number: 01
Percent: 100
NIOSH (RTECS) Number: 1000337PR
ACGIH TLV: NOT ESTABLISHED
===========================================================================
Physical/Chemical Characteristics
===========================================================================
Appearance And Odor: AMBER VISCOUS
LIQUID
Specific Gravity: 0.98
Solubility In Water: INSOLUBLE
===========================================================================
Fire and Explosion Hazard Data
===========================================================================
Flash Point: >200F/93C
===========================================================================
Reactivity Data
===========================================================================
Stability: YES
===========================================================================
Health Hazard Data
===========================================================================
Signs/Symptoms Of Overexp: EYE/SKIN:
IRRITATION.
Emergency/First Aid Proc: EYE: FLUSH
WITH WATER 15 MINUTES,CALL PHYSICIAN.
CALL A PHYSICIAN.
===========================================================================
Precautions for Safe Handling and Use
===========================================================================
Steps If Matl Released/Spill: SCRAPE
UP EXCESS,THEN CLEAN UP WITH
DETERGENT AND WATER.
Waste Disposal Method: COMPLY WITH
LOCAL,STATE AND FEDERAL REGULATIONS.
Precautions-Handling/Storing: AVOID
HIGH TEMPERATURES. AVOID CONTACT WITH
SKIN OR EYES.
===========================================================================
Control Measures
===========================================================================
Ventilation: MECHANICAL
Protective Gloves: RECOMMENDED
Eye Protection: SAFETY GLASS/FACE
SHIELD
Other Protective Equipment: AS NEED
TO PREVENT SKIN CONTACT
Suppl. Safety & Health Data:
PART B OF A 2 PART KIT.
===========================================================================
Transportation Data
===========================================================================
Trans Data Review Date:
85200
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED
BY THIS MODE OF TRANSPORTATION
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED
FOR THIS MODE OF TRANSPORTATION
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED
BY THIS MODE OF TRANSPORTATION
AFI PSN Code: ZZZ
AFI Prop. Shipping Name: NOT REGULATED
BY THIS MODE OF TRANSPORTATION
Additional Trans Data: PART B OF
A TWO PART KIT. NOT RESTRICTED.
===========================================================================
Disposal Data
===========================================================================
===========================================================================
Label Data
===========================================================================
Label Required: YES
Label Status: G
Common Name: ELMER'S EPOXY,PART
2
Special Hazard Precautions: EYE/SKIN:
IRRITATION.
Label Name: BORDEN CHEMICAL,CONSUMER
PRODUCTS DEPT
Label Emergency Number: 614-457-5200
=======================================================================
URL for this msds http://hazard.com.
If you wish to change, add to, or
delete information in this archive
please sent updates to dan@hazard.com.