3M CENTER -- SCOTCH BRAND HEAD CLEANING KIT 7400 & 7440
MATERIAL SAFETY DATA SHEET
FSC: 5835
NIIN: 00F000640
Manufacturer's CAGE: 54254
Part No. Indicator: A
Part Number/Trade Name: SCOTCH BRAND HEAD CLEANING KIT 7400 & 7440
===========================================================================

                            General Information
===========================================================================

Company's Name: 3M CENTER
Company's Emerg Ph #: (612) 733-1110
Record No. For Safety Entry: 001
Tot Safety Entries This Stk#: 001
Date MSDS Prepared: 01JAN85
Safety Data Review Date: 18JAN85
MSDS Serial Number: BBHBN
===========================================================================

                     Ingredients/Identity Information
===========================================================================

Proprietary: YES
Ingredient: PROPRIETARY
Ingredient Sequence Number: 01
-------------------------------------
Proprietary: YES
Ingredient: PROPRIETARY
Ingredient Sequence Number: 02
===========================================================================

                     Physical/Chemical Characteristics
===========================================================================

Appearance And Odor: CLEAR LIQUID-ALCOHOL ODOR
Boiling Point: 126F
Vapor Pressure (MM Hg/70 F): 20
Vapor Density (Air=1): 5
Specific Gravity: 0.916
Evaporation Rate And Ref: BUTYL ACETATE 0.8
Solubility In Water: 75%
Percent Volatiles By Volume: 100
===========================================================================

                      Fire and Explosion Hazard Data
===========================================================================

Flash Point: >126F (TCC)
Extinguishing Media: CO2, FOAM, DRY CHEMICAL, WATER FOG
Special Fire Fighting Proc: NONE
Unusual Fire And Expl Hazrds: NONE
===========================================================================

                              Reactivity Data
===========================================================================

Stability: YES
Hazardous Decomp Products: CO, CO2 AND HCL WHEN EXPOSED TO FLAME OR
EXCESSIVE HEAT.
Hazardous Poly Occur: NO
===========================================================================

                            Health Hazard Data
===========================================================================

Signs/Symptoms Of Overexp: LIQUID IRRITATING TO EYES AND SKIN.
Emergency/First Aid Proc: EYES: IMMEDIATELY FLUSH EYES WITH PLENTY OF
WATER, CALL A PHYSICIAN. SKIN: WASH WITH SOAP AND WATER.
===========================================================================

                   Precautions for Safe Handling and Use
===========================================================================

Steps If Matl Released/Spill: EXTINGUISH ALL IGNITION SOURCES, COLLECT
SPILLED MATERIAL, CLEAN UP RESIDUE, AND PLA IN METAL CONTAINER. USE
ABSORBENT MATERIAL AS NEEDED IN CLEANUP PROCEDU. OBSERVE PRECAUTIONS AND
USE SPECIAL PROTECTION AS RECOMMENDED BELOW.
Waste Disposal Method: COMMERICAL INCINERATION WITH DESTRUCTION AND
REMOVAL EFFICIENCY GREATER THAN 99.99% IS PREFERRED. OTHERWISE, DISPOSE IN
ACCORDANCE WITH LOCAL AND CURRENT U.S. ENVIRONMENTAL PROTECTION AGENCY
REGULATIONS. EPA HAZ WASTE D001.
Precautions-Handling/Storing: AVOID EYE CONTACT. KEEP OUT OF REACH OF
CHILDREN.
===========================================================================

                             Control Measures
===========================================================================

Ventilation: MECHANICAL EXHAUST
Eye Protection: AS REQUIRED
Suppl. Safety & Health Data: ST. PAUL, MINNESOTA 55144
===========================================================================

                            Transportation Data
===========================================================================

===========================================================================

                               Disposal Data
===========================================================================

Disposal Data Review Date: 89079
Rec # For This Disp Entry: 01
Tot Disp Entries Per NSN: 001
Landfill Ban Item: YES
Disposal Supplemental Data: ST. PAUL, MINNESOTA 55144 IN CASE OF
ACCIDENTAL EXPOSURE OR DISCHARGE, CONSULT HEALTH AND SAFETY FILE FOR
PRECAUTIONS.
1st EPA Haz Wst Code New: D001
1st EPA Haz Wst Name New: IGNITIBLE
1st EPA Haz Wst Char New: IGNITABILITY
1st EPA Acute Hazard New: NO
===========================================================================

                                Label Data
===========================================================================

Label Required: YES
Label Status: G
Common Name: SCOTCH BRAND HEAD CLEANING KIT 7400 & 7440
Special Hazard Precautions: LIQUID IRRITATING TO EYES AND SKIN.
Label Name: 3M CENTER
Label Emergency Number: (612) 733-1110
=======================================================================
URL for this msds http://hazard.com.  If you wish to change, add to, or
delete information in this archive please sent updates to dan@hazard.com.