BETZ ENTEC -- 622 ACRYLAMIDE COPOLYMER
MATERIAL SAFETY DATA SHEET
FSC: 6850
NIIN: 00F030857
Manufacturer's CAGE: 57394
Part No. Indicator: A
Part Number/Trade Name: 622 ACRYLAMIDE COPOLYMER
===========================================================================
                            General Information
===========================================================================
Company's Name: BETZ ENTEC INC
Company's Street: 200 WITMER RD
Company's City: HORSHAM
Company's State: PA
Company's Country: US
Company's Zip Code: 19044
Company's Emerg Ph #: 215-674-9200 OR 800-877-1940
Company's Info Ph #: 215-674-9200
Record No. For Safety Entry: 001
Tot Safety Entries This Stk#: 001
Status: SE
Date MSDS Prepared: 24MAY91
Safety Data Review Date: 28OCT93
Preparer's Company: BETZ ENTEC INC
Preparer's St Or P. O. Box: 200 WITMER RD
Preparer's City: HORSHAM
Preparer's State: PA
Preparer's Zip Code: 19044
MSDS Serial Number: BSLZX
===========================================================================
                     Ingredients/Identity Information
===========================================================================
Proprietary: NO
Ingredient: NON-HAZARDOUS FOR INGREDIENTS
Ingredient Sequence Number: 01
NIOSH (RTECS) Number: 1000314NH
===========================================================================
                     Physical/Chemical Characteristics
===========================================================================
Appearance And Odor: OFF-WHITE GRANULES, ODORLESS.
Vapor Pressure (MM Hg/70 F): <1
Vapor Density (Air=1): <1
Solubility In Water: MODERATE
pH: SUPP
===========================================================================
                      Fire and Explosion Hazard Data
===========================================================================
Flash Point: >200F
Flash Point Method: PMCC
Extinguishing Media: DRY CHEMICAL, CO2, FOAM, OR WATER
Special Fire Fighting Proc: WEAR POSITIVE PRESSURE SCBA (FULL FACE-PIECE
TYPE).
===========================================================================
                              Reactivity Data
===========================================================================
Stability: YES
Materials To Avoid: STRONG OXIDIZERS
Hazardous Decomp Products: ELEMENTAL OXIDES
Hazardous Poly Occur: NO
===========================================================================
                            Health Hazard Data
===========================================================================
Route Of Entry - Inhalation: YES
Route Of Entry - Skin: NO
Route Of Entry - Ingestion: NO
Health Haz Acute And Chronic: EYES: IRRITATION DUE TO MECHANICAL ACTION
ONLY. INHALATION: NUISANCE DUST MAY CAUSE IRRITATION TO UPPER RESPIRATORY
TRACT.
Carcinogenicity - NTP: NO
Carcinogenicity - IARC: NO
Carcinogenicity - OSHA: NO
Explanation Carcinogenicity: NONE
Emergency/First Aid Proc: EYES: IMMEDIATELY FLUSH W/WATER FOR 15 MINS.
INHALATION: REMOVE TO FRESH AIR. APPLY APPROPRIATE FIRST AID TREATMENT AS
NECESSARY. INGESTION: DON'T FEED ANYTHING BY MOUTH TO AN UNCONSCIOUS OR
CONVULSING PERSON. DILUTE CONTENTS OF STOMACH. INDUCE VOMITING BY GIVING BY
ONE OF THE STANDARD METHODS. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===========================================================================
                   Precautions for Safe Handling and Use
===========================================================================
Steps If Matl Released/Spill: VENTILATE AREA, USE SPECIFIED PROTECTIVE
EQUIPMENT. SWEEP UP & PLACE IN WASTE DISPOSAL CONTAINER. FLUSH AREA W/
WATER. WET AREA MAY BE SLIPPERY. SPREAD SAND/GRIT.
Waste Disposal Method: WATER CONTAMINATED W/PRODUCT MAY BE SENT TO
SANITARY SEWER TREATMENT FACILITY IN ACCORDANCE W/LOCAL, STATE, & FEDERAL
REGULATIONS. INCINERATE OR BURY IN APPROVED LANDFILL.
Precautions-Handling/Storing: KEEP DRUMS & PAILS CLOSED WHEN NOT IN USE.
KEEP DRY. STORE AWAY FROM OXIDIZERS. NORMAL CHEMICAL HANDLING.
Other Precautions: DON'T CONTAMINATE.
===========================================================================
                             Control Measures
===========================================================================
Respiratory Protection: USE RESPIRATORS WITHIN USE LIMITATIONS OR ELSE USE
SUPPLIED AIR RESPIRATORS. USE RESPIRATORY W/DUST/MIST FILTERS.
Ventilation: ADEQUATE TO MAINTAIN DUST CONCENTRATIONS BELOW THE EXPOSURE
LIMITS.
Protective Gloves: RUBBER
Eye Protection: SAFETY GLASSES
Work Hygienic Practices: WASH OFF AFTER EACH USE. REPLACE GLOVES AS
NECESSARY.
Suppl. Safety & Health Data: PH (1% SOLUTION): 7.6. DENSITY: 40 LBS/CUFT.
===========================================================================
                            Transportation Data
===========================================================================
===========================================================================
                               Disposal Data
===========================================================================
===========================================================================
                                Label Data
===========================================================================
Label Required: YES
Technical Review Date: 28OCT93
Label Date: 28OCT93
Label Status: F
Common Name: 622 ACRYLAMIDE COPOLYMER
Chronic Hazard: NO
Signal Word: CAUTION!
Acute Health Hazard-Slight: X
Contact Hazard-Slight: X
Fire Hazard-Slight: X
Reactivity Hazard-None: X
Special Hazard Precautions: EYES: IRRITATION DUE TO MECHANICAL ACTION
ONLY. INHALATION: NUISANCE DUST MAY CAUSE IRRITATION TO UPPER RESPIRATORY
TRACT. TARGET ORGANS: EYES, UPPER RESPIRATORY TRACT. INHALATION: IRRITATION
OF THE NOSE & THROAT. SKIN: MILD IRRITATION, DERMATITIS. EYES: IRRITATION,
CONJUNCTIVITIS, INCREASED CORNEAL PERMEABILITY. INGE
Protect Eye: Y
Protect Skin: Y
Protect Respiratory: Y
Label Name: BETZ ENTEC INC
Label Street: 200 WITMER RD
Label City: HORSHAM
Label State: PA
Label Zip Code: 19044
Label Country: US
Label Emergency Number: 215-674-9200 OR 800-877-1940
Year Procured: UNK
=======================================================================
URL for this msds http://hazard.com.  If you wish to change, add to, or
delete information in this archive please sent updates to dan@hazard.com.